Precoat for Feather Finish (Luxury Interiors)

Precoat for Feather Finish Interior Emulsion is a premium, ultra-high-build interior architectural primer-sealer. It is engineered to bridge the performance gap between a standard wall primer and acrylic wall putty.
Unlike conventional, thin liquid market primers that merely seal porosity, Precoat for Feather Finish deposits a thick, micro-fiber reinforced acrylic matrix across your walls. It actively fills minor surface imperfections, hairline cracks, and rough plaster patches, providing the structural strength, thickness, and smoothness of premium acrylic putty—all in a single brush, roller, or spray application.

• Acrylic Putty Fusion Technology: Formulated with high-solid acrylic polymers that replicate the leveling, density, and thickness of acrylic wall putty. It binds deeply with the plaster substrate to create an inseparable, structural bond.
• Zero Chipping & Flaking: Standard putty layers can easily flake or delaminate when subjected to impact or moisture. Precoat features extreme elastomeric adhesion, meaning it will never chip, peel, or crack away from the wall.
• Non-Yellowing Ultra-White Base: Enriched with premium titanium dioxide pigments. It provides an incredibly bright white, high-hiding base that will not turn yellow over time. This maximizes the color depth and coverage of your final luxury emulsion coat.
• Exceptional Tensile Strength: Contains specialized reinforcement micro-binders that make the cured film significantly stronger than standard fillers. It holds the plaster tightly and stops surface micro-cracks from bleeding through to the paint.
• Mirror-Smooth Enamel Holdout: Seals the substrate uniformly to prevent uneven paint absorption. It guarantees a uniform, rich, “feather-finish” sheen across your final wall surface.
  

1. Surface Preparation: Ensure the surface is thoroughly cured, structurally sound, clean, and free of loose dust or efflorescence.
2. Dilution Profile: For structural filling and a thick, putty-like layer, use minimal dilution (maximum 5-10% clean water). For standard priming over perfectly level drywall, dilute up to 15-20% by volume.
3. Application Method: Apply uniformly using a high-density roller, premium nylon brush, or airless spray gun.
4. Sanding & Topcoating: For an ultra-luxurious finish, lightly sand the dried coat with fine-grit sandpaper (320/400 grit) to remove minor ridges, wipe away the dust, and apply your luxury interior emulsion directly over it.